New Tools!

So a few weeks back I mentioned that I had a voucher for Cooksons, whilst in Birmingham the other week my dad dropped by the jewellery quarter and I picked these up.

Id been talking about a texturing hammer for agesss so I finally bought one, whilst in there I was looking at a riveting hammer which I thought would be perfect for adding a different kind of texture.
My dad kindly offered to pay for this as a 'valentines day treat' bless the parents!

I havent had chance to use these yet as Im currently having some issues with gas so as soon as its sorted Ill be back in the workshop :)

Im planning on making some new things as I'm hopefully applying for the Harley Gallery again but the deadline is the end of march.

A few weeks back I had also bought a bezel pusher from eBay for £2.99
http://www.ebay.co.uk/itm/300570435884?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Again I haven't had chance to use this yet but as soon as I do Ill be putting a review up, this applies to the hammers too! 

Side one of Texture Hammer

Side two of Texture Hammer

Riveting Hammer



Bezel Pusher



Follow me!

Facebook: www.Facebook.com/CharlotteTattersallJewellery

Twitter: CTJewellery1

Website: http://charlottetattersall.wix.com/charlottetattersall




New Commission!

Recently I was asked to make a bangle for someones 18th Birthday, she also wanted to incorporate a B into the bangle. 

I wanted to do something a little different instead of just stamping a letter so had a go at making the B in wire which Im very happy with, Obviously making letter charms out of wire would only work with certain letters but I think overall its come out really well and I'm pleased!

Follow me!

Facebook: www.Facebook.com/CharlotteTattersallJewellery

Twitter: CTJewellery1

Website: http://charlottetattersall.wix.com/charlottetattersall











Tool Review! Letter Stamps

Tool Review!
2.5mm Letter Stamps
------------------------------------------------------

My dad picked my set up for me from machine mart as they were considerably cheaper than other places. They are made from steel and come in a case. Although I was looking for 1.5/2mm for the sake of 1/2mm (and some money) I opted to go for the 2.5mm

Machine Mart:

£9.59 Inc VAT
www.machinemart.co.uk/shop/range/guid/85169F65-D6BD-49E3-B69F-74868E7B0ED9?da=1&TC=SRC-2%2E5%20letter%20stamps

eBay:

I found some for £11.95 but to be honest they looked cheap and bad quality so Ill leave the link for some others which are slightly more expensive
£16.99
www.ebay.co.uk/itm/RDGTOOLS-JEWELRY-LETTER-STAMPS-2-5MM-NEW-STOCK-/290401586730?pt=UK_BOI_Metalworking_Milling_Welding_Metalworking_Supplies_ET&hash=item439d488e2a

Cookson Gold:

Now Cooksons don't stock 2.5 mm they only do 2mm which are here 
£13.91 Inc VAT
www.cooksongold.com/Jewellery-Tools/2.0mm-Letter-Punches-A---Z-prcode-997-3605

-----------------------------------------------------------------


Ive had great joy with using these, they are good quality and so easy to use.
Id highly recommend buying a steel bench block (review to come next week!) to stamp on with these as you get a much better defined stamp on the metal.

With silver I found them to stamp with ease but using on harder metals such as copper (which I use to sample on first) you need a bit more force when hammering to get a good indentation.

I use a small standard hammer that you would use for household DIY (I 'borrowed' mine from my dads shed) I found this to be perfect for stamping as due to the size and weight you don't end up over stamping the metal.

These do take a bit of practising with as when stamping words it is hard to try and figure out how close / where you should align the next stamp but after a few trial and error goes on copper you should get the hang of it. I tend to use a permanent marker to mark out spaces or where the centre should be etc this burns off as soon as heat is applied so don't worry!

The only downside to these is that each time you go to stamp a letter you have to check the stamp to make sure you've got the stamp the right way otherwise youll have a backwards / upside letter.


TIP!
If you do happen to spell a word wrong (its happen to me more times that id care to admit) don't worry and think you have to scrap your work and try again. All you have to do is take some easy solder and solder over the letter, buff away using a emery stick and carry on like it never happened! 









Tool Review! Curved and Straight Burnishers

Tool Review!
Curved and Straight Burnisher
-----------------------------------------------


Sutton Tools:

Curved: £3.20 exc VAT
www.suttontools.co.uk/curved-burnisher-with-wooden-handle.html

Straight: £3.20 exc VAT
www.suttontools.co.uk/straight-burnisher-with-wooden-handle.html

Cookson Gold:

Curved: £11.38 inc VAT
www.cooksongold.com/Jewellery-Tools/Curved-4-Burnisher---With-Handle-prcode-999-AJL

Straight: £8.29 inc VAT
www.cooksongold.com/Jewellery-Tools/Burnisher-4-Straight-With-Handle-prcode-999-CJE

eBay: 

Curved: £3.75 inc VAT and P&P
www.ebay.co.uk/itm/Curved-stainless-steel-burnisher-jewellers-tool-/300455939566?pt=UK_Crafts_JewelleryMaking_GL&hash=item45f491cdee

Straight: £3.75 inc VAT and P&P
www.ebay.co.uk/itm/Straight-stainless-steel-burnisher-jewellers-tool-/300375470087?pt=UK_Crafts_JewelleryMaking_GL&hash=item45efc5f007

----------------------------------------------------------------



Now as you can see there is a bit of a price difference between all 3 and from looking at the ones on eBay they have the same packaging as the ones I bought from Sutton so they are exactly the same. It pays to do your research!

My main use for these is when I'm stone setting cabochons.
Ive found that I favour the curved one more as the straight is awkward to use and doesn't really do what I want it to do.

The curved one is perfect for when you are pushing the metal over the cabochon as it shaped to the stone but doesn't scratch or damage the stone in the process It is also ideal for getting a high shine.
The stones I work with are usually quite small so I find that the Curved is easier to use.
Ive had both of these for almost 3 years now and Ive rarely used the straight one, but its always handy to keep when the curved cant quite cut it.

They are both of really good quality and the curved smooth wooden handle is comfortable to hold.
Overall If your going to buy one, go for the curved and get it off eBay!












Follow me!

Facebook: www.Facebook.com/CharlotteTattersallJewellery

Twitter: CTJewellery1


Tool Review! Emery Boards

Tool Review!
Emery Boards
------------------------------------

Here we have a review of Emery Boards, which I know is more of a consumable than a tool, but they are something I use pretty much constantly whilst making Jewellery.

I wish someone had introduced these to me sooner during university, my sandpaper days would of been long gone! I cant imagine making any thing without these, they are pretty much an essential to me now.

These come in a variety of grades from fine to coarse so you can work your way through them to achieve your desired finish, they also come in different shapes which are the best things ever!
They come in flat, round and triangular.

------------------------------------------------------------

The Flat:

The flat are great for pretty much any aspect of sanding. Depending of the job I usually start with a Red stick working my way through to a dark grey stick and then a lighter grey stick for finishing, occasionally I skip out the red stick as this is really coarse and sometimes isn't needed.

(I realise that this probably isn't the 'proper' way to do it but I don't really pay much attention to the grades, I just go with my instinct which seems to work)

The Round:

Next we have the round ones. These are life savers when it comes to making rings/bangles, it means you can get to the soldering join with ease without over sanding
 (which I found happened quite often when using a file or sanding paper and a split mandrel in my Dremel) These make life 10x easier and I don't know what I'd do without them now!

The Triangular:

And Finally we have the triangular ones. These are a recent addition to my tools. I found this one to be really useful for getting into angles/corner of joins, I don't tend to use these as much as the other two as I find the flat ones tick most of the boxes for my requirements, but when I do stone setting these are good for sanding the join between the setting and the ring.

--------------------------------------------------------------

Overall I highly recommend these and I don't know what I'd do without them. If you don't already use them, what are you waiting for!


I don't live too far from Birmingham, so whenever I take a trip to the Jewellery Quarter I tend to stock up on these I buy them from Sutton Tools as they are slightly cheaper then Cooksons.

If your ordering offline I suggest ordering from Cooksons as thats mainly where I buy 99% of my things from and they often have free postage.
By the time you've done a separate order on Sutton tools and added the postage on it works out about the same price


They range from 95p - £1.90 exc VAT on Sutton Tools
http://www.suttontools.co.uk/emery-sticks.html

And range from £1.10 - £2.14  exc VAT on Cooksons Gold
http://www.cooksongold.com/category_select.jsp?query=ermery+sticks




 Flat Sticks






L-R Fine, Very Coarse, Coarse


Round and Triangular




Follow me!

Facebook: www.Facebook.com/CharlotteTattersallJewellery

Twitter: CTJewellery1

Tool Review! Disc Cutter

Tool Review!
Disc Cutter

------------------------------------

So here is my first review of 2014!

Set of 7 Disc Cutter, 6mm-16mm

After contemplating buying one of these for a while I recently purchased this from eBay.

http://www.ebay.co.uk/itm/SET-OF-7-CIRCULAR-DISC-CUTTER-CUTTING-TOOL-6mm-16mm-/290578928191?pt=UK_Crafts_JewelleryMaking_GL&hash=item43a7da923f

The one I bought was £17.99 which was more in my price range compared to a similar one from Cookson Gold which came in at £34.30 Inc VAT

http://www.cooksongold.com/Jewellery-Tools/Disc-Cutter-7-Hole-prcode-997-3603

When this arrived in the post I was a little disappointed as it was covered in oil, but after cleaning it up it was fine.

Disc cutters are really simple to use, you place your sheet metal in the centre under which size hole you desire, you then put the punch through the hole and hammer until the punch has cleared through the cutter.
You do get a slight bit of excess metal which can easily be filed off. I do recommend oiling this from time to time to make sure it works as smoothly as possible.

I dont recommend this if your cutting copper, I tried and found the copper was too hard of a metal and it works better with soft metals such as silver.

If your looking to make masses of circles or just want them to be uniform each time I highly recommend this product, Although I haven't personally tried the one from Cooksons I cant see there being much different between the two, as at the end of the day this has given me the uniform circles I want. For someone on a budget such as myself this item was perfect.










£17.99 Via eBay



Follow me!

Facebook: www.facebook.com/CharlotteTattersallJewellery

Twitter: @CTJewellery1

Cookson Gold Gift voucher!

So a few months ago I had a bad experience with Cookson gold, which is so unusual as I never have a bad word to say, their customer service is next to none and the products are always of good quality. 
I'd placed an order to pick up at 11am and I was still waiting in the store well after 12 for it. But to reimburse me for my wasted time Cooksons kindly offered me a gift voucher! (Which automatically hoists them back to the top of my good books)

Now I still have this gift voucher and have been uming and aring what to put it towards, and for a while now I've had my eye on one of their texturing hammers. I'd looked into getting one off eBay as they were about £10+ cheaper, I've bought tools from eBay before and they've been a bit hit and miss, you also can't tell what the quality is going to be like until it arrives. So with gift voucher in handI've  decided to put it towards a slighter more pricey hammer as in the long run it will be better quality and last me longer!

The only decision I've got left to make now is which texture I want! I could be a while figuring this one! 



Also over the next few weeks I'm going to be doing reviews on some of the tools and products Ive purchased and use. 
I hope these will be super useful for people just starting out, students on a budget (as I was myself) or makers who are looking for some opinions on tools!


Follow me!

Facebook: www.facebook.com/CharlotteTattersallJewellery

Twitter: @CTJewellery1

Recent Commissions

 Ive had quite a few commissions recently!
Any of these can be customised to your own needs.




Childs Initial and Heart Charm Bangle



Childs Initial Heart Charm Bangle






12mm Tigers Eye Pendant on 22" Chain with 
personalised tag clasp.



Personalised Dog Tag Necklace

The Harley Gallery


With all the commotion of getting ready for Harley Gallery and Christmas I have been so slack with Blogging! 
Im doing a few posts to update you all on my goings on since my last post.


My weekend at the Harley Gallery was really successful! It was really nice to be in an atmosphere where everyone was like minded and the people who are there have to come buy arts/crafts/jewellery things which have a medium to high price point.
I got so many compliments about my work and lots of people were really friends and interested in knowing about what I do, where I studied etc..

I feel like I learned so much from the Art Market; how to set up my own stall, displays, pricing, selling my work and working out what sells. I did lose quite a few sales due to not having a customers ring size which is disappointing, but you live and learn and I have a few people email me for orders after the  weekend.

I put some of my degree show work out to show but didn't really have any intention of selling, but one woman loved the large coiled earrings and was adamant she wasn't leaving without them. Im so pleased that I've sold some of the pieces!

Overall Im so so proud of myself, I worked hard and it paid off.









The GIveaway!

Recently over on my Facebook page I was doing a give away when I hit 200 likes.
This went really well and I gained over 200 followers due to people sharing my page.
A winner was picked on Christmas Eve and one lucky girl called Kate was the winner.

The giveaway incurred a lot of interest and I plan on doing another giveaway soon when I hit another milestone on my page!








About Me

My photo
3rd Year Decorative Arts Student Aspiring Jeweller and Enamellist. My works are for sale, So please get in touch! Metal work, Drawings, 3D. Contact: Charlotte.Tattersall@Hotmail.co.uk

Follow me!

Follow me!